Protecting Images/Movie Clips
Set the data to read-only to prevent images from being erased by mistake.
1. Press the
button.
The last recorded image appears on the LCD monitor screen.
2. In the
mode, use the four-way controller (
desired images.
To view the previous image, press the four-way controller ( ).
To view the next image, press the four-way controller ( ).
3. Press the MENU button, then use the four-way controller( ) to
select [Protect] and press the
4. Use the four-way controller (
then press the
[This Image]: Protect one image/movie.
[All Images]: Protect all images/movies (at once).
5. Use the four-way controller (
the
button to confirm.
Press the MENU button to return to the
indicator appears on the selected image.
If you wish to cancel the protect function of a protected image,
select [Unprotect].
EN-52
button.
) to choose the desired setting,
button.
) to select [Protect], then press
) to select the
mode. The