Table of Contents
Advertisement
74
EN
SYMPTOM
7. The cassette will not load
properly.
8. The memory card will not
load properly.
9. In the 5-Second mode,
recording ends before
5 seconds have elapsed.
10. Snapshot mode cannot be
used.
11. The colour of Snapshot
looks strange.
12. The image taken using
Snapshot is too dark.
13. The image taken using
Snapshot is too bright.
14. Digital Zoom does not
work.
15. Programme AE with
special effects and Fade/
Wipe Effects do not work.
16. The Black & White Fader
does not work.
Downloaded from:
7. •The cassette is in the wrong
•The battery's charge is low.
8. •The memory card is in the
9. •The 5-Second mode is set to
10. •The Squeeze mode is
11. •The light source or the
•The Sepia or Monotone
12. •Shooting was performed
13. •The subject is too bright.
14. •10X optical zoom is selected.
•The Shooting Mode Switch is
•"PROGRAM AE" is set to
•"WIDE MODE" is set to "PS-
•Multi-Analyser 4 or Multi-
•Picture Wipe or Dissolve are
15. •The Power Switch is set to
16. •The Sepia or Monotone
https://www.usersmanualguide.com/
TROUBLESHOOTING
POSSIBLE CAUSES
position.
wrong position.
"ANIM." in the Menu
Screen.
selected.
subject does not include
white. Or there are various
different light sources behind
the subject.
mode is activated.
under backlit conditions.
set to "XGA/VGA" or
"UXGA".
"VIDEO ECHO" in the Menu
Screen.
WIDE" in the Menu Screen.
Analyser 9 was attempted
during Digital Zoom.
being used in a scene
transition.
"
".
mode is activated.
CORRECTIVE ACTION
7. •Set it in the right position
(
pg. 10).
•Install a fully charged
battery (
pg. 6, 7).
8. •Set it in the right position
(
pg. 11).
9. •Select "5S" in the Menu
Screen (
pg. 31).
10. •Disengage the Squeeze
mode (
pg. 28).
11. •Find a white subject and
compose your shot so that it
also appears in the frame
(
pg. 18, 19).
•Turn off Sepia and
Monotone (
pg. 34, 35).
12. •Press the BACKLIGHT
Button (
pg. 36).
13. •Set "PROGRAM AE" to
"SPOTLIGHT" in the Menu
Screen (
pg. 34).
14. •Set "ZOOM" to "40X" or
"300X" in the Menu Screen
(
pg. 27).
•Set the Shooting Mode
Switch to "VIDEO"
(
pg. 12, 20).
•Disengage the "VIDEO
ECHO" mode (
35).
•Disengage the "PS-WIDE"
mode (
pg. 28).
•Disengage Multi-Analyser 4
or Multi-Analyser 9
(
pg. 18).
•Wait until the Picture Wipe
or Dissolve effects are
completed (
pg. 20, 32).
15. •Set the Power Switch to
"
" (
pg. 32, 34).
16. •Turn off Sepia and
Monotone (
pg. 32, 34).
(cont.)
pg. 20,
Advertisement
Table of Contents
