Table of Contents
Advertisement
PLAYBACK
Power Switch
Lock Button
Recording Start/Stop Button
Display
SOUND
M D
O E
–
12B I T
M D
O E
–
SYNCH
RO
–
REC M
ODE
–
COPY
–
S / AV
I N UT
P
–
RETUR
N
* Each setting is linked with "
"
SYSTEM", which appears when the
Power Switch is set to "
parameters are the same as in the description
on pg. 29.
NOTES:
● It is also possible to change the ON SCREEN
settings by pressing DISPLAY on the remote
control.
● "REC MODE" can be set when the Power
Switch is set to "
● When "S/AV INPUT" is set to "ON",
camcorder playback cannot be viewed on
the AV output.
Downloaded from:
Advanced Features For Video
MENU Wheel
Menu Screen
STEREO
SOUND 1
O . O
SP
OF F
OF F
GR-DV2000 only
DISPLAY" or
" (
pg. 29). The
" or " " (
pg. 13, 27).
https://www.usersmanualguide.com/
Using Menus For Detailed Adjustment
The following procedure applies to all except Synchro
Comp (
pg. 69, 70).
1
Set the Power Switch to "
the Lock Button located on the switch.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select the desired function
menu, and press it. The selected function menu appears.
4
Rotate the MENU wheel to select the desired
function, and press it to display the Sub Menu.
5
Rotate the MENU wheel to select the desired
parameter and press it. Selection is complete.
6
Rotate the MENU wheel to select "1RETURN" and
press it twice to close the Menu Screen.
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
COPY
S/AV INPUT
(GR-DV2000
only)
BEEP*
TALLY*
DEMO MODE*
ON SCREEN*
DATE/TIME*
TIME CODE*
" while pressing down
pg. 40.
pg. 40.
pg. 70.
Allows you to set the video recording
mode (SP or LP) depending on your
preference (
pg. 13).
It is recommended you use "REC
MODE" in the "
VIDEO" Menu
when using this camcorder as a
recorder during dubbing (GR-
DV2000 only,
pg. 57, 59).
ON: Enables dubbing of images
recorded on a tape to a memory
card (
pg. 60).
OFF: Enables snapshots to be taken
during video playback.
ON: Enables audio/video signal
input from the AV and S-VIDEO
connectors (
pg. 57).
OFF: Enables audio/video signal
output to a TV, VCR, etc. via the AV
and S-VIDEO connectors
(
pg. 52, 56).
Makes a beep or melody sound/
activates the shutter sound effect.
Turns on/off the tally lamp.
Starts automatic demonstration.
Makes the camcorder's indications
appear/disappear from the
connected TV screen.
Makes the date/time appear/
disappear on the camcorder.
Makes the time code appear/
disappear on the camcorder.
39
EN
Advertisement
Table of Contents
