Table of Contents
Advertisement
A 2.6 Notes on special hazards
A 2.6.1 Electrical energy
Only use original fuses with prescribed
amperage! Make sure that the mains
voltage corresponds to the required
voltage of 230V. In case of malfunc-
tions in the electrical power supply, switch off
the machine immediately.
Work on electrical systems or equipment may
only be carried out by a qualified electrician or
by instructed persons under the direction and
supervision of a qualified electrician in accor-
dance with the electrotechnical regulations.
Picture no. 5
Front/side view of the nail
dust collector with operating
devices and mains connec-
tion
A 2.6.2 Block diagram/schematic representation of the system
A 2.6.3 Noise
The machine produces only slight, barely perceptible vibrations and noise with a rating level of LAR >
58 dB(A). According to the „Noise and Vibration Occupational Health and Safety Ordinance", in short
LärmVibrationsArbSchV - these are not health hazards.
6
Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
Cold appliance
plug / connection
with fuse link
Kaitstud / Secured by https://mereneid.eu/
If inspection, maintenance, cleaning and repair
work is carried out on parts of the machine, the
nail dust collector must be disconnected from
the circuit or de-energised by removing the po-
wer plug from the socket.
The electrical equipment of the machine must
be inspected/checked regularly.
Defects, such as loose connections or scorched
cables, must be rectified immediately.
Potentiometer
for infinitely
variable Speed
control
Fuse
2A inert
Illuminated LED
push button ON/
OFF
Fan motors
Filter and filter guide
Control and electronics
Fuse and mains connection
Advertisement
Table of Contents
