Table of Contents
Advertisement
A 2.4 Safety instructions for normal
operation
In case of commercial use, the nail
dust collector must be inspected at
least once a year by a competent
person in accordance with the fol-
lowing specifications of the Emplo-
yer's Liability Insurance Association.
BGV A3 „Electrical systems and equipment".
In addition, the system must be checked regu-
larly, at least once a year, for operational safety
in accordance with the requirements of the
Operational Safety Ordinance (BetrSichV). The
inspections must be documented in accordan-
ce with the specifications.
A Safe removal of possible blockages
In the event that a foreign object enters the
interior of the housing or the fan motors, pro-
ceed as follows. motors, proceed as follows:
•
Disconnect the unit from the mains voltage
•
Try to remove the foreign body from the outside
•
If the foreign object cannot be removed from
the outside, the unit must be dismantled and, if
necessary, opened by a trained specialist.
Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
Kaitstud / Secured by https://mereneid.eu/
»
Safety instructions
•
Any operation that is not in accor-
dance with the intended use must
be refrained from.
•
The nail dust collector may only be operated
who are mentally and physically fit.
•
Make sure that the mains voltage corresponds
to the required voltage of 230V.
•
The nail dust collector & filters must be cleaned
or changed regularly according to the manufac-
turer's instructions.
•
Only the filters listed in the operating instruc-
tions and provided by the manufacturer may
be used.
•
Appropriate measures must be taken to ensure
that the nail dust collector is only used in a safe
and functional condition.
•
Before each use of the nail dust collector, it
must be checked for externally visible damage
and defects.
•
To avoid electric shock or other hazards, never
open an electrical enclosure and do not insert
any objects into the enclosure.
•
The nail dust collector is protected by a built-in
fuse. A defective fuse must not be bypassed or
replaced with a stronger fuse.
•
Safety-relevant damage (e.g. loosened screw
connections, defective protective devices, elec-
trical faults, defective operating devices) must
be reported to the responsible supervisor or
the manufacturer. The latter must then check
whether safe use is still possible.
•
Repairs may only be carried out by authorised
and competent persons.
•
Before starting work, every employee must en-
sure that no one is endangered by the use of
the nail dust collector.
•
A damaged nail dust collector must be shut
down immediately and secured against being
put back into operation.
5
Advertisement
Table of Contents
