Table of Contents
Advertisement
A
2 Safety instructions
A 2.1 Intended use
The nail dust collector has been built
for installation under a work table or
table top and has been developed
exclusively for extracting dusts as
they occur during work in the nail studio. Any
other use beyond this, which does not comply
with the accident prevention regulations of the
Employer's Liability Insurance Association, is
considered improper use. The manufacturer is
not liable for any damage resulting from this.
In this case, the user must bear the risk alone.
Intended use includes, among other things, ob-
serving the respective manufacturer's opera-
ting instructions for the system components of
the nail dust collector as well as the inspection
and maintenance instructions.
The system components are built and linked
according to the latest state of the art and the
recognised safety rules. Nevertheless, their
use may result in hazards for the user or third
parties or impairment of the system or other
material assets.
Irrespective of the laws and regulations menti-
oned in these instructions, the respective valid
laws and regulations must be observed and
the generally recognised rules of technology
must be applied.
A 2.2 Organisatorische Maßnahmen
The operating instructions for the
Taifun II Premium GreenTech nail dust
collector must always be available to the
operating and maintenance personnel.
In addition to the operating instructions,
generally
applicable,
gal and other binding regulations for acci-
dent prevention and environmental pro-
tection must be observed and instructed.
It must be ensured that the filters are regular-
ly cleaned and dry-cleaned according to the
operating instructions. If cleaning is no longer
possible, the filters must be replaced with the
replacement filters specified by the manufac-
turer. The replaced or clogged filters must be
disposed of in accordance with the Closed Sub-
4
Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
Kaitstud / Secured by https://mereneid.eu/
company-internal
le-
stance Cycle and Waste Management Act. The
personnel working on the nail dust collector
must have read and understood the operating
instructions, especially the chapter on safety
instructions, before starting work.
We recommend the management to have the
training confirmed by signature.
All safety and danger notices on the machine
must be observed.
All safety and danger notices on the machine
must be kept completely legible.
In the event of safety-relevant changes to
the machine or its operating behaviour, it is
imperative that the machine is shut down im-
mediately, the fault rectified and the respon-
sible body or person reported immediately.
No changes, additions or conversions may be
made to the machine that affect safety without
the approval of the manufacturer of the nail dust
collector. Prescribed intervals or intervals spe-
cified in the operating instructions for recurring
tests/inspections must be observed. This also
applies to maintenance instructions in the do-
cumentation of the component manufacturers.
A 2.3 Selection and qualification of
personnel
Only instructed, mentally and physically suita-
ble persons who are at least 16 years old may
work on the machine.
Work on electrical equipment of the nail dust
collector may only be carried out by a qualified
electrician or by a „specially instructed per-
son" under the guidance and supervision of
a qualified electrician in accordance with the
electrotechnical regulations. Specialists and
instructed persons in this sense are service
technicians/customer service of the manufac-
turer or trained electricians.
Advertisement
Table of Contents
