Panasonic ES-RS10 - Compact Shaver Operating Instructions

Panasonic ES-RS10 - Compact Shaver Operating Instructions


Panasonic ES-RS10 - Compact Shaver Operating Instructions


  • Keep the appliance dry.

This symbol means "Do not wash the product with water"

  • Terminate usage when there is an abnormality or failure

  • The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil is damaged as you will cut your skin.
  • Always follow the cautions printed on the battery.
  • Check the polarity of the battery (+ and -) and install it correctly.
  • Do not mix a new battery with an old one or use different types of batteries.
  • Remove the battery immediately when it is discharged.
  • Remove the battery when not using the appliance for an extended period of time.
  • Use the battery by the recommended use-by date.
  • Attach the protective cap when carrying or storing.
  • Never alter the appliance. Also, do not disassemble or repair it.
  • Do not use excessive pressure to apply the outer foil to your lip or other part of your face. Do not apply the outer foil directly to blemishes or injured skin.
  • Do not disassemble the battery or throw it into a fire Do not short-circuit the battery.
  • DO not share your shaver with your familty or other people. Doing so may result in infection or inflammation.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction conerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Intended use

  • Do not leave the shaver in a hot area.
  • Never use thinners, benzine, or alcohol to clean the shaver since it may cause malfunction or cracking/discoloration of the parts. Clean using a mild detergent.

Parts identification

Parts identification

  1. Main body
    1. Protective cap
    2. Outer foil
    3. Foil frame release button
    4. Power switch [ ]
    5. Switch lock button
    6. Foil frame
    7. Inner blade
    8. Battery cover
  2. Cleaning brush

Replacing batteries

  • Make sure the power switch is in the " " position.
  1. Remove the battery cover.
  2. Insert two LR6 (AA alkaline batteries).
  • You can use the appliance for approximately 1 month with the two Panasonic LR6 (AA alkaline batteries). (When using once a day, 3 minutes at a time)
  1. Attach the battery cover.

Use only LR6 (AA alkaline batteries).

Using the shaver

  1. Depress the switch lock button and slide the power switch to the left.
    Using the shaver - Step 1 - Switch on
  2. Hold the shaver as illustrated above and shave.
    Using the shaver - Step 2 - Holding the shaver

Start shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver.
Applying excessive pressure does not provide a closer shave.

Cleaning the shaver

  • Make sure the power switch is in the " " position.
  1. Remove the foil frame and the inner blade.
  2. Clean with the brush as illustrated.
  • Clean the outer foil and the shaver body using the long brush.
    Cleaning the shaver - Step 1
  • Clean the inner blade using the short brush by moving it in direction (A).
    Do not move the short brush in direction (B) as it will damage the inner blade and affect its sharpness.
    Cleaning the shaver - Step 2
    Do not use the short brush to clean the outer foil.
  1. Attach the foil frame and the inner blade.

Removing the foil frame

  • Make sure the power switch is in the " " position.

Remove the foil frame while pressing the foil frame release button.

Attaching the foil frame

Attach the foil frame as illustrated.

Replacing the outer foil and the inner blade

outer foil once every year
inner blade once every two years

Replacing the outer foil

  • Make sure the power switch is in the " " position.
  1. Remove the foil frame.
  2. Gently push the outer foil in the way as illustrated. Then it will pop up from the foil frame.
  3. The new outer foil should be slightly bent and pushed in until it hooked in the foil frame.
  • Attach the outer foil so that the plastic part faces inwards.

Replacing the inner blade

  1. Remove the inner blade by grasping it firmly at both ends and pulling straight away from the shaver.
  2. To insert the new inner blade hold the blade at both ends and press downward until it clicks into place.

Replacement parts

Replacement parts are available at your dealer or Service Center.

Replacement parts for ES-RS10 Outer foil WES9941
Inner blade WES9942


Model No. ES-RS10
Power source LR6 (AA alkaline battery) x 2 (sold separately)

This product is intended for household use only.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Panasonic ES-RS10 - Compact Shaver Operating Instructions


Need Assistance?

Do you have a question about the ES-RS10 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents