Image Mode Selection - Sanyo PLC-XD2200 Owner's Manual

Computer Input
Direct Operation
Select the desired image mode among Dynamic, Standard,
Real, Blackboard (Green), Colorboard, Image 1, Image 2,
Image  and Image 4 by pressing the IMAGE button on the
remote control.
Menu Operation
1
Press the MENU button to display the On-Screen Menu.
Use the Point
▲▼
then press the Point
2
Use the Point
▲▼
and then press the SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Image 1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 33-34). This Image memory is
provided in each computer, component, S-video and video
input source.
2

Image Mode Selection

buttons to select Image select and
or the SELECT button.
►
buttons to select the desired item
Remote Control
IMAGE button
Image select Menu
Dynamic
Standard
Real
►
Blackboard(Green)
Colorboard
Image 1
Image 2
Image 3
Image 4
IMAGE button
Dynamic
Standard
Real
Blackboard (Green)
Colorboard
Image 1
Image 2
Image 
Image 4
Red