Menu Bar - Sanyo PLC-XD2200 Owner's Manual

Basic Operation
For detailed functions of each menu, see "Menu Tree" on pages 68-69.
Main Menu
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
Input
①
Used to select an input source from Computer 1, Computer 2 or Video
PC adjust
②
Select Auto PC adj ., Fine sync, Total dots, Horizontal, Vertical, Current mode, Clamp, Display area-H and Display
area-V to adjust the parameters to match with the PC input signal format (pp.29-31).
Image select
③
For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),
Colorboard and image 1 - 4 (p.32).
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard
and Image 1- 4 (p.39).
Image adjust
④
For computer source, used to adjust computer image [Contrast, Brightness, Color temp ., white balance (R/G/B),
Sharpness and Gamma] (pp.33-34).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp ., white balance (R/G/
B), Sharpness, Gamma, Noise reduction and Progressive] (pp.40-41).
Screen
⑤
For computer source, used to adjust size of the image [ Normal, True, wide, Full, Custom, Custom adj. and Digital
zoom +/– ] (pp.34-35).
For Video source, used to set size of image [Normal, wide, Custom and Custom adj.] (p.42).
Sound
⑥
Used to adjust the volume or mute the sound (p.24).
Setting
⑦
Used to set the projector's operating configurations (pp.43-57).
Information
⑧
Display the input source information: Input , H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp
counter , Power management, Key lock, PIN code lock and Remote control (p.58).
Network
⑨
See the owner's manual of "Network Set-up and Operation".
Guide
⑩
The key operation is displayed.
22

Menu Bar

Sub-Menu
►
Computer 1
Computer 2
Video
RGB
RGB
(pp.27, 36-37).