Adjustment Of Chair - Sanyo HEC-RX1BK Instruction Manual

ADJUSTMENT OF CHAIR

Before sitting on the chair
Bring all parts of the chair to
their home position by pressing
the RECLINING( ) button.
Sitting on the chair while the foot rest is being
raised is dangerous. Be sure to lower the foot
rest completely before sitting on the chair.
1
Sit on the center of the chair.
Sit deeply in the massage chair so that the
waist touches the back rest.
NOTE
Do not attempt to climb onto or off the seat
by stepping on the foot rest. Do not attempt
to place anything on, or sit on the foot rest.
The user may fall over, resulting in an accident
or injury.
2
Adjust the angle of head rest.
You can move the head rest forward.
Choose the preferred angle by adjusting the head rest.
3
Press the ON/OFF button.
When you press the button, the ON/OFF lamp illuminates.
4
Adjust the angle of the back rest, foot rest, and seat.
When adjusting to a comfortable position
Press the ZERO-G button.
When you press the button, the back rest, foot rest,
and seat are automatically adjusted to prearranged
reclining angles.
Reclining can be stopped during the reclining
motion by pressing either the ZERO-G button,
HOME POSITION button, RECLINING button,
LEG button, ON/OFF button, or STOP button.
＊ When the reclining motion is stopped by pressing
the ON/OFF button or STOP button, press the
ON/OFF button to resume the operation.
＊
When the reclining motion is stopped by pressing
buttons other than the ON/OFF button or STOP
button, press the desired button for motion.
9
Foot rest
Back rest
Press
Foot rest
Adjustment range
Approx. 35゜
Head rest
Press
Press
Posture suited for whole body
comfort
When adjusting to a favorite position
Keep the RECLINING button pressed until the desired angle is achieved.
Recline the back rest, and raise
the foot rest by continuously
pressing the button.
Raise the back rest, and lower the foot rest by
continuously pressing the button.
The angle of the seat will be changed automatically
in accordance with the angle of the back rest.
For the sake of safety, depending on the angle,
the foot rest may go up once and then lower.
NOTE
Be sure to check that there is no-one or any pets around the chair prior to adjusting
the back rest. It may result in an accident or injury.
5
Adjust the angle of the foot rest.
Angle adjustment can be made for foot rest only.
Keep the LEG button pressed until the desired angle is achieved.
Raise the foot rest by continuously
pressing the button.
Lower the foot rest by continuously
pressing the button.
WARNING
When the foot rest is suddenly released after being raised by hand, it will return forcibly to
the previous position. For safety, be sure to lower the foot rest slowly using your hand.
Angle is returned automatically to the home position
■
when the HOME POSITION button is pressed.
For the sake of safety, depending on the angle, the foot rest may go up once and then lower.
If you press the HOME POSITION button during use, operation will stop.
Foot rest
Press
Adjustment range
115 ゜
Foot rest
Approx. 40゜
Back rest
Adjustment range
Approx. 80゜
Foot rest
Adjustment range
Approx. 80゜
Back rest
10