Advertisement
Overview of SCMI-03S Module Settings
Main menu
Menu levels (press ENTER to select, press ESC to return)
Mode
Off
Cool
Heat
Settings
Reg.cons
Output
Code
Louvres
Fan
Display
Error list
Display of the last 8 recorded errors (Error –1 to Error –8)
Both ACs are off (inactive)
AC 1
Only the AC 1 is used for cooling
AC 2
Only the AC 2 is used for cooling
Together
Both ACs are used for cooling
Alternate
Both ACs alternate in cooling according to the set
period
Combi
Both ACs alternate in cooling according to the set
period; start working together if the performance
of one AC is not sufficient.
AC 1
Only the AC 1 is used for heating
AC 2
Only the AC 2 is used for heating
Together
Both ACs are used for heating
Alternate
Both ACs alternate in heating according to the
set period
Combi
Both ACs alternate in heating according to the
set period; start working together if the
performance of one AC is not sufficient.
Goal T
The target (desired) temperature
Period
Setting of the alternation period of the ACs
operation
D alarm
The difference between desired and actual
temperatures; if exceeded, the error-indicating
relay is activated
Dtemper
The difference between the desired and actual
temperature; if exceeded, both ACs work
together
Direct
Direct logic for activation of the output relay
Inverse
Inverse logic for activation of the output relay
Sinclair
Sinclair code for IR signal for AC control
Nordic
Nordic code for IR signal for AC control
On
AC louvres control is switched on
Off
AC louvres control is switched off
Auto
Automatic control of the AC fan performance
Fan 1
Low level of the AC fan performance
Fan 2
Medium level of the AC fan performance
Fan 3
High level of the AC fan performance
Backlit
LCD backlight brightness
Contrast
LCD contrast
IdleTime
Idle time to restore the default state of the display
- 6 -
Range
Note
-
-
-
-
-
-
-
-
-
-
-
15–30°C
1–48 hours
1.0–5.0°C
1.0–5.0°C
-
-
-
-
-
-
-
-
-
-
16 levels
16 levels
Off or
30–120 sec
-
Advertisement
