Advertisement
Installation
Installation of the SC05010 Module
The SC05010 module with an IR diode should be placed into each indoor unit and connected
to the SCMI-03S module. SC05010 is supplied with a 5m cable as standard and is equipped
with an adhesive label for attachment. The location of the module itself must be chosen with
regard to the conditions of the specific installation. It must be placed in the immediate vicinity
of the IR receiver of the AC unit (the IR receiver is a part of the display).
The orientation of the module is also important, the IR diode must point towards the IR
receiver. The recommended location is the inner side of the front cover – see Fig. 3.
Fig. 3 Location of SC05010 at the indoor unit display – view of the inner side of the front
cover
Installation of the SCMI-03S Module
The SCMI-03S module itself can be placed on a DIN rail. In addition to the two SC05010
modules, it is necessary to place a reference temperature sensor in the room according to
the installation requirements. For wiring diagram, please see Fig. 2.
- 7 -
1 – SC05010 module
2 – Display
Advertisement
