Advertisement
Manual Setting of the SCMI-03S Module
After turning on the power and initializing the module, the basic display appears containing
the set operation mode, the set reference temperature and the actual reference temperature
Coo xx.x°C
Ref xx.x°C
After pressing the ▲ key, the data for the first AC unit appears
Set
Off
T1
xx.xºC
After pressing the ▲ key again, the data for the second AC unit appears
Set
Off
T2
xx.xºC
where the above example corresponds to a state where both ACs are inactive. With the AC
running, the first line will show the operation mode (Hea-heating or Coo-cooling) and the
desired temperature in degrees Celsius.
Press the ENTER key to enter the basic menu of the module; it has 3 menus
Mode
Settings
Error list
Operation Mode of the SCMI-03S Module
The menu of module operation mode has three items
Off
Cool
Heat
If the mode is changed to Off and confirmed by pressing the ENTER key, only the message
below is displayed.
Saved OK
Off
-
Allows you to set the operation mode of the module
-
Allows you to set the necessary parameters of the module operation
-
Allows you to view errors during module operation
-
Both AC units are off (inactive)
-
Both AC units operate in the cooling mode according to another setting
-
Both AC units operate in the heating mode according to another setting
- 3 -
Advertisement
