Advertisement
1
Firmware Update
1.1
Introduction
The firmware of the Auto-Link-SPE products can be upgraded using the AVRDUDE open source
tool running on a Linux machine. Linux can either run on a physical PC or in a virtual machine like
VirtualBox. The only prerequisite is that is has access to the Auto-Link-SPE via USB. We
recommend using Ubuntu 20.04 LTS, but any other distribution being able to run AVRDUDE will
work too.
1.2
Preparation
Install AVRDUDE if it is not yet installed.
# sudo apt install avrdude
Attach the Auto-Link-SPE via USB to your Linux machine.
Make sure that only one Auto-Link-SPE is attached.
Check whether the Auto-Link-SPE device is seen by the operating system.
# lsusb -d 0403:7f85
Bus 001 Device 003: ID 0403:7f85 Future Technology Devices International, Ltd
1.3
Installation
Unpack the firmware archive and change into the firmware folder.
# cd <your home directory>
# tar xf auto-link-spe-g-<version>.tgz
# cd auto-link-spe-g
Run the flash script
# sudo ./flash-auto-link.sh
2
Support Information
If you have questions concerning our product, please contact us:
Manufacturer:
i-novative® GmbH
Kesselbodenstrasse 11
85391 Allershausen
INO_Auto-Link-SPE-G_Flash_Manual_V1.0.docx
Rev. 1.0
2021-04-25
E-Mail:
support@i-novative.de
Phone:
+49 8166 5 82 91 40
Fax:
+49 8166 9 88 91 70
Internet:
www.i-novative.de
3 / 3
Advertisement
