Setting Focus - Sanyo VPC-S600 Owner's Manual

Setting Focus

Images can be captured with the focus determined automatically using auto focus. You may over-ride the
auto focus and specify [
1. Rotate the mode dial to
2. Press the power switch to turn on the power.
3. Press the four-way controller ( /
changes each time the button is pressed. You can also
change the setting using four-way controller (
4. Press the button to confirm the setting.
5. Compose your scene and press the shutter release button.
The camera has three focus modes: Standard, Macro and Infinity.
The table below will help you choose the appropriate focus mode:
Focus mode Description
Standard Select Standard-focus setting for most occasions when you want the camera to
automatically determine the focus setting.When using Standard-focus setting, any
object at a focus range of 40 cm (15.7") or greater can be in focus.
Macro Select Macro-focus setting to capture close-up images. When the lens is zoomed to
its widest position you may focus objects as close as 6 cm (2.4"). When the lens is
zoomed to its telephoto position (3x zoom) you may focus objects as close as 35 cm
(13.8").
Infinity Select Infinity-focus setting when you want to capture images of subject at a
distance of infinity. The flash mode will be set to Flash Off automatically.
] macro or [ ] infinity.
, , , , , or
). The focus mode
.
).
Focus Focu ocus
Standard Standard Standa
OK : OK : OK :
EN-31