Table of Contents
Advertisement
Help Guide
Wireless Speaker
SRS-XV800
Precautions
On safety
Refer to the Reference Guide supplied with the speaker.
Important information such as the model name is located on the rear side of the speaker.
If the speaker is not used for an extended period, unplug the AC power cord from the AC outlet. When unplugging the
speaker, be sure to grasp the plug. Never pull on the cord itself.
On placement
Do not insert foreign objects from the opening of the speaker unit.
To eliminate the risk of malfunctions, avoid the following locations when placing or leaving this speaker.
A place subject to high temperatures, such as under direct sunlight or lighting equipment, near a heat source, or
in a sauna
Inside a vehicle with the windows closed (especially in summertime)
A place exposed to hot air, such as from a hair dryer
Place this speaker on a flat, level surface. When placed on a sloped surface, the speaker may fall over or fall off the
surface due to its own vibration, resulting in injuries, malfunctions, or performance degradation.
Depending on the conditions where this speaker is placed, it may fall over or fall off the surface. Do not leave any
valuables near the speaker.
This speaker is not anti-magnetic. Keep objects susceptible to magnetism (recorded tapes, watches, cash cards and
credit cards with magnetic coding, etc.) away from the speaker. When you carry around the speaker, keep this in
mind as well.
If your skin remains in contact with the handle for a long time while the light is turned on, there is a risk of low-
temperature burns. To carry a speaker while it is powered on, turn the light (lighting function) off.
Other notes
Do not use or leave the speaker in an extremely cold or hot environment (temperature outside the range of 5 °C – 35
°C (41 °F – 95 °F)). If the speaker is used or left in outside the above range, the speaker may automatically stop to
protect internal circuitry.
If you use this speaker for a long time, the temperature of this speaker may rise, but it is not a malfunction.
At high temperature, the charging may stop or the volume may reduce to protect the battery.
When the speaker's light seems bright or glaring, turn up the room lights or turn off the lighting function.
Put your fingertip directly onto the touch sensor for operations.
Do not operate the touch sensor with a wet hand to avoid a malfunction.
88
Advertisement
Table of Contents
