Setting Up - ViewSonic PJ502 User Manual

Setting up

WARNING
Place the projector in a stable position horizontally. A fall or a turnover could cause an
injury and/or damage to the projector. Then using a damaged projector could result in a
fire and/or an electric shock.
* Don't place the projector on an unstable, slanted or vibrating surface such as a wobbly
or inclined stand.
* Do not place the projector in the side/front/rear-up position, except for care of the air
filter.
* For the projector installed bottom-up, use the accessory filter cover for bottom-up use.
And in the case of a ceiling installation or the like, contact your dealer before installation.
Place the projector in a cool place, and pay attention enough to ventilation. The high
temperature of the projector could cause a fire, a burn and/or malfunction to the projector.
* Don't stop up, block and cover the projector's vents.
* Keep a space of 30 cm or more between the sides and other objects such as walls.
* Don't place the projector on a metallic thing or anything weak in heat.
* Don't place the projector on a carpet, cushion or bedding.
* Don't place the projector in direct sunlight or near a hot object such as heater.
* Put nothing about lens and vents of the projector. Put nothing on the projector.
* Put nothing that is sucked or sticks to the bottom of projector. This projector also has
additional intake vents also on the bottom.
Do not place the projector on the place that gets wet. Damping the projector or inserting
liquid in the projector could cause a fire, an electric shock and/or malfunction to the pro-
jector.
* Don't place the projector in a bathroom or the outdoors.
* Put nothing containing the liquid near the projector.
CAUTION
Avoid a smoky, humid or dusty place. Placing the projector in such place could cause
a fire, an electric shock and/or malfunction to the projector.
* Don't place the projector near a humidifier, a smoking space or a kitchen.
* Put nothing containing the liquid near the projector.
ViewSonic PJ502
5