Table of Contents
Advertisement
Basic Operation
To operate the function of your LCD TV, you can use your remote control or those buttons
above your LCD TV to set input source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1.
Insert the power plug.
2.
Connect external equipment properly.
3.
Turn on the Main AC Power Switch, located on the rear of the cabinet. (If the LCD TV
will not be used for a long period of time, please turn it off) The power LED indicator
will be red when AC Power Switch is on.
Power On/Off
To turn the LCD TV on/off :
Press the POWER button under the LCD TV or press the Power button on your remote
control to turn on/off the TV. The power LED indicator is green when the LCD TV is on.
Select input source
Select the required input sources. Press the "Input" button at the right side of the LCD TV or
on the remote control repeatedly until the desired source appears.
VOLUME Adjusting
Press VOL-/+ at the right side of the LCD TV to adjust the volume, or press Vol
on the remote control to adjust the volume.
To silence the volume, press MUTE on the remote control.
If you want to restore volume, press MUTE again, or press Vol
control directly.
Channel Select
To select the channel you want, press CH-/+ buttons at the right side of the LCD TV, or press
number keys, CH
or CH
Use the button
to select the channel number with dash.
"-/—"
Return to the previous channel, press RECALL on your remote control.
ViewSonic
on the remote control to select your desired channel.
N2600w
and Vol
and Vol
on the remote
22
Advertisement
Table of Contents
