Led Troubleshooting - MTI FREEDOM CORE II User Manual

APPLE WATCH KIT INSTALLATION, U.S.

LED TROUBLESHOOTING

Visual Reference
In order to maximize consumer shopping experience during open hours, consider the following steps to extend battery life:
• TURN OFF or put all displayed devices/SKUs in SLEEP mode for the off hours for your store.
• Lowering the brightness level (during open hours) on your devices by 15-20%
If you experience any condition not listed above, please contact Customer Service at 1-800-426-6844, Opt. 1
MTI 1050 NW 229th Avenue Hillsboro, OR 97124
System Status
Alarm Module white double flash
every 8 seconds
No audible alarm
Alarm Module flashes red and
white
Steady alarm
Alarm Module flashes red and
white
No audible alarm
Alarm Module LED solid red
No audible alarm
Five double-beeps
Lights off
PPGsupport@mobiletechinc.com
FREEDOM CORE II™ USER GUIDE
Condition
Power is on, Alarm Module is
disarmed
Alarm Module is in a state of
alarm due to theft, tampering or
improperly mounted customer
product
Alarm Module has been alarming
for more than 10 minutes
Over current from the device(s) or
short circuit in Alarm Module
System is in a state of battery
back-up mode
SYSTEM CANNOT BE
PROGRAMMED IN THIS STATE
MTI P/N 063-00085 rev A ©2016 MTI All Rights Reserved
Solution
Mount customer product and
program/arm system
Insert IntelliKey to silence alarm
Fix alarming condition (check
mounted product)
Remove IntelliKey
Insert IntelliKey to silence alarm
Fix alarming condition (check
mounted product)
Remove IntelliKey
One device or combination of all
devices are too power hungry for
Freedom Core II system and
TM
cannot be merchandised as is
Replace Alarm Module
Reconnect power
9