Table of Contents
Advertisement
Error message for USB On-the-Go functions:
Error Code
Messages
No USB disk is detected.
USB disk is protected from copy.
Document inside the USB disk with wrong format.
If any error occurs, error code will only show 3 seconds. After three seconds, it will automatically return to
display screen.
Timer Setting for Output Source Priority
2.
This timer setting is to set up the output source priority per day.
Procedure
Step 1: Press and hold "
for output source priority.
Step 2: Press "
programs (detail descriptions in Step 3).
Step 3: Please select setting program by following each procedure.
Progra
m#
Press "
select staring time. Press "
"
"
setting values are from 00 to 23, with 1-hour increment.
Press "
select staring time. Press "
"
"
setting values are from 00 to 23, with 1-hour increment.
" button for 3 seconds to enter Function Setting Mode
", "
" or "
" button to enter the selectable setting
Operation Procedure
" button to set up Utility First Timer. Press "
" to confirm. Press "
" button to adjust values, press "
" button to set up Solar First Timer. Press "
" to confirm. Press "
" button to adjust values and press "
" button to adjust values and press
" button again to select end time. Press
" button to confirm. The
" button to adjust values and press
" button to select end time. Press
" button to confirm. The
26
LCD
Screen
LCD
Screen
" button to
" button to
Advertisement
Table of Contents
