Table of Contents
Advertisement
Remote Display Panel Installation
The LCD module can be removable and installed in a remote location with an optional communication cable.
Please take the follow steps to implement this remote panel installation.
Step 1. Remove the screw on the bottom of LCD panel and pull down the module from the case. Detach the
cable from the remote communication port. Be sure to replace the retention plate back to the inverter.
Step 2. Prepare your mounting holes in the marked locations as shown in the illustration below. The LCD
module then can be securely mounted to your desired location.
Note: Wall installation should be implemented with
the proper screws to the right.
Ø5-Ø9
10
M3
Advertisement
Table of Contents
