Advertisement
•
If you intend to use an extension, make sure it is in good
condition, that the plug is earthed and that the cross
section of the wires is at least equal to that of the power
cable provided with the appliance.
•
To avoid all risk of electric shock, never immerse the
power cable, plug or appliance itself in water.
If the power cable is damaged, it must
•
be replaced by the manufacturer, the
manufacturer's customer services or a
qualified electrician in order to elimi-
nate all risk.
•
For your personal safety, never take the appliance to
pieces on your own. Always contact customer services.
The appliance complies with the following EU di-
rectives:
•
Low Voltage Directive 2006/95/EC and subsequent
amendments;
•
EMC Directive 2004/108/EC and subsequent amend-
ments;
•
Materials and accessories coming into contact with food
conform to European regulation (EC) no. 1935/2004.
DISPOSAL
In compliance with European directive 2002/96/EC, the
appliance must not be disposed of with household waste,
but taken to an authorised waste separation and recycling
centre.
ELECTRICAL CONNECTION (UK ONLY)
A) If your appliance comes fitted with a plug, it will in-
corporate a 13 Amp fuse. If it does not fit your socket,
the plug should be cut off from the mains lead, and an
appropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug af-
ter removing the fuse: do not insert in a 13 Amp socket
elsewhere in the house as this could cause a shock ha-
zard.
With alternative plugs not incorporating a fuse, the
circuit must be protected by a 15 Amp fuse. If the plug
is a moulded-on type, the fuse cover must be re-fitted
when changing the fuse using a 13 Amp Asta approved
fuse to BS 1362. In the event of losing the fuse cover, the
plug must NOT be used until a replacement fuse cover
can be obtained from your nearest electrical dealer. The
colour of the correct replacement fuse cover is that as
marked on the base of the plug.
B) If your appliance is not fitted with a plug, please follow
the instructions provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance with
the following code:
Green and yellow: Earth
Blue:
Brown:
As the colours of the wires in the mains lead may not corre-
spond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The green and yellow wire must be connected to the termi-
nal in the plug marked with the letter E or the earth symbol
or coloured green or green and yellow.
The blue wire must be connected to the terminal marked
with the letter N or coloured black.
The brown wire must be connected to the terminal marked
with the letter L or coloured red.
16
Neutral
Live
Advertisement
