Home Connect; Setting Up; Remote Start - Siemens CM878G4 6B Series Instruction Manual

Table of Contents

Advertisement

Descaling solution: Do not allow any descaling
solution or descaler to come into contact with the
control panel or other surfaces on the appliance.
This damages the surfaces. If this does happen,
remove the descaling solution immediately with
water.
If you have used a steam-assisted operation
immediately before descaling, you must first switch the
appliance off so that the residual water is pumped out
of the evaporator system.
Mix 400 ml water with 200 ml liquid descaler to
1.
make a descaling solution.
Press the On/Off button.
2.
Remove the water tank and fill it with descaling
3.
solution.
Once the water tank has been filled with descaling
4.
solution, push it back in again fully.
Close the control panel.
5.
Press the Menu button.
6.
The operating modes menu opens.
Select the "Descaling" operating mode.
7.
If you touch the "Next" field, information on the
cleaning operation is displayed.
The duration of the descaling programme is
displayed. It cannot be changed.
Press the "Start/stop" button to start the cleaning
8.
operation.
The appliance is descaled. You can see the duration
counting down in the status bar. An audible signal
sounds once descaling has finished.
First rinsing cycle
Open the control panel.
1.
Remove the water tank, rinse thoroughly, fill with
2.
water and reinsert.
Close the control panel.
3.
Press the Start/Stop button to start.
4.
The appliance rinses. As soon as the rinsing cycle
has run through, a signal sounds.
Second rinsing cycle
Open the control panel.
1.
Remove the water tank, rinse thoroughly, fill with
2.
water and reinsert.
Close the control panel.
3.
Press the Start/Stop button to start.
4.
The appliance rinses. As soon as the rinsing cycle
has run through, a signal sounds.
Subsequent cleaning
Open the control panel.
1.
Empty and dry the water tank.
2.
Switch off the appliance.
3.
Descaling is complete and the appliance is ready for
use again.
oHome Connect
T his appliance is Wi-Fi-capable and can be remotely
H o m e C o n n e c t
controlled using a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as an oven
with no network connection and can still be operated
via the display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
Ensure that you follow the safety instructions in this
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the
Home Connect app.~ "Important safety
information" on page 5
Operating the appliance directly from the appliance
always has priority. During this time, it is not possible
to operate the appliance using the Home Connect
app.

Setting up

To set up Home Connect for your appliance, you
require the following:
Your appliance, which must be connected to the
mains and switched on,
A smartphone or tablet with the latest version of the
iOS or Android operating system,
The Home Connect app,
The supplied Home Connect installation instructions,
And your appliance within range of the Wi-Fi signal
for your home network
The app guides you through the entire process. Follow
the instructions in the app.

Remote Start

In order to start and operate your appliance via the
Home Connect app, you must activate remote start. If
remote start has been deactivated, you can only display
the operating statuses in the Home Connect app and
implement appliance settings.
Note:
Some of the operating modes can only be started
on the oven.
Remote start is automatically deactivated:
if you open the oven door 15 minutes after remote
start has been activated.
if you open the oven door 15 minutes after the end
of operation.
When you start the oven using the controls on the
appliance itself, remote start is automatically activated.
You can now make changes or start a new programme
from your mobile device.

Home Connect

en
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cm878g4b6b

Table of Contents