Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Auvidea JNX30D
Summary of Contents for Auvidea JNX30D
- Page 1 AUVIDEA JNX30D TECHNICAL REFERENCE MANUAL SCOPE OF WORK Providing technical information and documentation to the product line JNX30D for Nvidia Jetson Nano & NX REPORT NUMBER 38486 ISSUE DATE [REVISED DATE] DEC.2021 [DEC.2021] Version PAGES...
-
Page 2: Table Of Contents
COPYRIGHT NOTICE ..................4 SECTION 2 OVERVIEW ....................5 Jetson Nano ..............................5 JNX30D ................................. 5 Applications ..............................5 JNX30D features and comparison ....................... 5 Technical specifications ..........................6 Model pictures ............................. 7 Power consumption ............................ 7 Options ................................ 7 SECTION 3 FEATURES ..................... - Page 3 JNX30D TECHNICAL REFERENCE MANUAL SECTION 7 DISCLAIMER ....................18 VERSION: 1.0 Page 3 of 19 DEC 2021...
-
Page 4: Copyright Notice
For any other mode of sharing, please contact the author at the email below. info@auvidea.com Commercial use and distribution of the contents of this document is not allowed without express and prior written consent of Auvidea GmbH. -
Page 5: Overview
OVERVIEW Jetson Nano This new JNX30D carrier board turns the Jetson Nano compute module into a super mini computer. The Nano offers very high computational (quad core ARM® Cortex®-A57 with up to 1.43 GHz) and graphical (NVIDIA Maxwell™ with 128 CUDA cores) processing performance in a tiny form factor. -
Page 6: Technical Specifications
JNX30D TECHNICAL REFERENCE MANUAL UART 2x (J14) plus 1x 40 pin header 40 pin header 2x (40 pin header) 2x (40 pin header) 40 pin header 40 pin header (5V tolerant, unidirectional) 2x (40 pin header) 2x (40 pin header) -
Page 7: Model Pictures
25 pcs (display port, M.2, PoE, 48V § power in, super cap option, 2 RPi camera module connectors, SPI, I2C, switches, etc.) design services: you architect your custom carrier board and Auvidea designs and produces it § - please ask for a quote VERSION: 1.0... -
Page 8: Features
JNX30D TECHNICAL REFERENCE MANUAL SECTION 3 FEATURES GPIO-Header Crypto chip VERSION: 1.0 Page 8 of 19 DEC 2021... -
Page 9: Pinout Description
JNX30D TECHNICAL REFERENCE MANUAL SECTION 4 PINOUT DESCRIPTION J1 - Power input jack Nexus Description Note Reverse voltage protection, over voltage protection (SMA6J18A/CA) with max 20V peak Reverse voltage protection also functions as back power protection if PoE injection is used with J32 pin 2. -
Page 10: J8 - Usb-2
JNX30D TECHNICAL REFERENCE MANUAL CSI_D_D0_P CSI_D_D0_N CSI_C_CLK_P CSI_C_CLK_N CSI_C_D1_P CSI_C_D1_N CSI_C_D0_P CSI_C_D0_N Every CSI camera uses its own I2C bus lanes J8 - USB-2 Description Socket pin Note USB2_D_N USB2_D_P J9 - HDMI Standard pinout CEC is not supported (pin 13 of HDMI connector) -
Page 11: J11 - Usb 3.0 - 3.1
JNX30D TECHNICAL REFERENCE MANUAL CSI_B_D1_P CSI_B_D1_N CSI_B_D0_P CSI_B_D0_N CSI_A_CLK_P CSI_A_CLK_N CSI_A_D1_P CSI_A_D1_N CSI_A_D0_P CSI_A_D0_N Every CSI camera uses its own I2C bus lanes J11 - USB 3.0 – 3.1 USB Typ A standard pinout In Rev 1: power control is always on, 5V 1A... -
Page 12: J14 - Uart Connector
JNX30D TECHNICAL REFERENCE MANUAL 4.11 J14 - UART connector JST-GH 1.25mm Description Socket pin Note UART0_TXD 3.3V UART0_RXD 3.3V UART2_TXD 3.3V, Debug port UART2_RXD 3.3V, Debug port Unidirectional 4.12 J22 - Reset Button To reset the compute module 4.13 J32 - Button and LED header... -
Page 13: J36 - Fan Connector
JNX30D TECHNICAL REFERENCE MANUAL 4.14 J36 - Fan connector Picoblade 1.5mm Description Socket pin Note Max. 1A TACH Not connected 4.15 P11 - PoE connector This connects to the 4 centre pins of the ethernet magnetics on the cable side to extract ore inject... -
Page 14: U10 - Crypto Chip
JNX30D TECHNICAL REFERENCE MANUAL SPI1_CS1_LS 3.3V SPI1_CS0_LS SPI0_MOSI_LS SPI0_MISO_LS SPI1_MISO_LS SPI0_SCK_LS SPI0_CS0_LS SPI0_CS1_LS ID_I2C_SDA 3.3V, GEN1_I2C_SDA ID_I2C_SCL 3.3V, GEN1_I2C_SCL GPIO01_LS GPIO11_LS GIIO07_LS GPIO13_LS I2S0_LRCK_LS UART1_CTS_LS SPI1_MOSI_LS I2S0_SDIN_LS I2S0_SDOUT_LS Please use any Raspberry Pi modules with care and carefully check compatibility as compatibility was in mind but cannot be guaranteed for all modules. -
Page 15: Led - Eth
JNX30D TECHNICAL REFERENCE MANUAL 4.18 LED - Eth Shows Ethernet activity on Socket pin 194 - on[0]/off[1], default: off At own risk resistor can be moved to control Eth-LED via socket pin 188 (link LED) 4.19 LED - Over current Placed between J1 (Power connector) and J3 (Ethernet). -
Page 16: Revisions And Changes
JNX30D TECHNICAL REFERENCE MANUAL SECTION 5 REVISIONS AND CHANGES Rev 1 VERSION: 1.0 Page 16 of 19 DEC 2021... -
Page 17: Faq
JNX30D TECHNICAL REFERENCE MANUAL SECTION 6 To be added. VERSION: 1.0 Page 17 of 19 DEC 2021... - Page 18 JNX30D TECHNICAL REFERENCE MANUAL SECTION 7 DISCLAIMER Thank you for reading this manual. If you have found any typos or errors in this document, please let us know. This is the preliminary version of this data sheet. Please treat all specifications with caution as there may be any typos or errors.
- Page 19 JNX30D TECHNICAL REFERENCE MANUAL End of dokument VERSION: 1.0 Page 19 of 19 DEC 2021...
Need help?
Do you have a question about the JNX30D and is the answer not in the manual?
Questions and answers