Table of Contents
Advertisement
The display will show the Harmony OFF situation for a short period.
If you are playing with Styles, start the Style with [START/STOP].
2. Press the [HARMONY] button again to select the first Harmony type, 01, shown
in the display for a short period.
3. Play a three note chord on the lower keyboard below the split point, and play a
single note on the upper keyboard.
<------- Lower -------><-------------------------- Upper -------------------------->
You will hear two notes play on the right hand at varied intervals, depending on
the note played.
4. Press the [HARMONY] button again to select the second Harmony type (O2)
and play the same chord and single note again. This time you will hear a three
note chord on the right hand for every single note played. The chord inversion
changes according to which note of the octave you play.
5. Press the [HARMONY] button once more to select the third Harmony type (O3),
play the same chord and single note once again. Now you will hear two notes at
octave intervals for every single note played.
6. Pressing the [HARMONY] button again turns the function off.
Balancing the Style accompaniment tracks with the Mixer
When playing with Styles, you can adjust the volume of one section with respect to
the others using the [MIXER] Volume controls. You will be able to balance all the
Style sections; Drums, Bass, Accomp as well as the Lower and Upper keyboard
sections. How the MIXER controls are organized is explained on page 6.
In Style mode, to increase the volume of the Bass track, for example, press the top
[INCREASE VOLUME] button and hold it down until you reach the Volume required.
The display shows the Volume level of the section being controlled, in this case the
Bass section.
To decrease the volume, press the bottom [DECREASE VOLUME] control.
INCREASE VOLUME
DECREASE VOLUME
Note: The volumes of the three Accompaniment tracks
are controlled simultaneously by the [ACCOMP] Vol-
ume buttons.
GK330
13
Hide quick links:
Advertisement
Table of Contents
