Specifications - Makita UR013G Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Handle type
No load speed
Overall length
(without cutting tool and battery)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Applicable cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Cutter blade
Plastic blade
Nylon cutting head
2-tooth blade
(P/N 198345-9)
3-tooth blade
(P/N 195299-1)
4-tooth blade
(P/N 196895-8)
Chisel blade
(P/N 199872-9)
Shredder blade
(P/N 199874-5)
Nylon cutting head
(P/N 199884-2)
Plastic blade
(P/N 199868-0)
BL4020 / BL4025 / BL4040 / BL4050F* / BL4080F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
11 ENGLISH
UR013G
Bike handle
-1
0 - 6,700 min
-1
0 - 5,000 min
1,863 mm
2.7 mm
255 mm
255 mm
255 mm
225 mm
270 mm
450 mm
305 mm
D.C. 36 V - 40 V max
5.9 - 7.2 kg
IPX4
PDC01 / PDC1200