Threading The Machine - Janome 2030DC-T Instruction Book

w
z
c
v
b
x
z
x
e
c
v b

Threading the Machine

• Threading the machine
z Draw the end of the thread around the upper thread
x While holding the thread near the spool w, draw the
w
c Firmly draw the thread up from right to left over the
v Pass the thread through the lower thread guide. Slide
b Thread the needle from front to back, or use the
13
Raise the presser foot. Press the
q
needle up/down button q to raise
the thread take-up lever to its
highest position.
q Needle up/down button
CAUTION:
Turn OFF the power switch before threading the
machine.
guide.
end of the thread down around the check spring
holder e.
w Spool
e Check spring holder
take-up lever, and down into the take-up lever eye.
the thread behind the needle bar thread guide on the
left.
needle threader.