Table of Contents
Advertisement
Installation and maintenance guide
8 SPARE PARTS AND ACCESSORIES
!
IMPORTANT!
Only use spare and wear parts approved by the manufacturer!
8.1 Material Links
The material inlet and outlet are connected via the G1/2" internal thread in the main body of the material pressure
regulator.
The following add-on parts are used for other thread sizes:
Cod.
220240
Double nipple, stainless steel, 3/8" external thread – 1/2" external thread.
Further connection options available upon request.
9 TRANSPORT, PACKAGING AND STORAGE
9.1 Transportation
Safety shoes! (to protect your feet from injury caused by material pressure regulator falling).
Always transport and store the material pressure regulator with the utmost care:
> Do not throw or drop the device.
> Do not place other objects on the material pressure regulator or on the packaging.
> Protect the material pressure regulator from dirt, moisture, heat and cold.
> Do not use force when unpacking the device. Do not damage the plastic parts.
> When storing the material pressure regulator, leave it in its packaging until assembly.
9.2 Transport Inspection
Immediately upon receipt of the device, check that it is complete and has not been damaged in transit.
If you see external damage during transport, do not accept the delivery or only accept it with reservations. Note the extent
of the damage on the carrier's transport documentation/delivery note. Make a complaint.
Report hidden defects as soon as they are discovered, as claims for damages can only be made within the applicable
time limits.
9.3 Packing
Only environmentally friendly materials are used for the packaging. Therefore, please follow these rules:
> Separate the different types of packaging material for environmentally friendly disposal.
> Recycle recyclable materials.
> Reuse reusable packaging materials.
Description
Version
400168
Advertisement
Table of Contents
