Installation; Preparing The Door; Removing The Body - Husqvarna AUTOMOWER 536576002 Manual

Note: All pictures shown are for illustration purposes only. Actual product appearance may differ
due to variations among models.

Preparing the door

A separate kit is needed to install the Husqvarna Automower® Fence Door. Refer to the installation
instructions provided with the door kit.

Removing the body

a
CAUTION: Pull the connectors. Do not pull the cables.
1. Clean dirt and grass from the product before you remove the parts.
2. Set the Main switch to 0.
3. Clean the area around the grommets.
4. Pull out the rubber grommet and remove the charge cable.
5. Pull out the rubber grommet and remove the light cable or ultrasonic cable, depending on
model.
6. The body is attached to the chassis at 3 or 4 positions, depending on model. At each position,
hold the chassis with one hand and remove the front cover with a fast and short pull.

INSTALLATION

430X, 430XH, 450X, 450XH, 520, 520H, 550, 550H
5