Procedure 2. Intubate The Patient - GlideScope LoPro S1 Operation & Maintenance Manual

Procedure 2.
Please read the
To perform an intubation, Verathon recommends using one of the following techniques appropriate for the
style laryngoscope being used. Prior to beginning this procedure, verify that the monitor is receiving an
accurate image from the video laryngoscope.
Option 1. LoPro Blade or GVL Stat
If you are using a Mac-style or Miller-style blade, skip to the next option, Mac-Style or Miller-Style Blade.
1. Stabilize the patient's head.
2. Look in the mouth, insert the blade midline, and then advance the tip into the vallecula.
3. Look at the screen, and then lift the epiglottis for a view of the larynx.
4. Look in the mouth, and then introduce an endotracheal tube alongside the blade.
5. Look at the screen, and then complete the intubation.
6. If using a GlideRite Rigid Stylet, remove it by pulling toward the patient's feet.
Option 2. Mac‑Style or Miller‑Style Blade
1. If the patient's condition allows, place the head in a sniffing position.
2. Look in the mouth, insert the blade into the right side, and then sweep the tongue left.
3. Lift the blade for the best view of the larynx.
4. Look in the mouth, and then introduce an endotracheal tube alongside the blade.
5. Complete the intubation.
Operations & Maintenance Manual: Using the Device
Intubate the Patient
Warnings & Cautions section before performing the following tasks.
23
0900-4940 REV-13