Procedure 2. Attach The Video Cable To The Monitor - GlideScope LoPro S1 Operation & Maintenance Manual

Procedure 2.
This procedure provides basic instruction on connecting video cables to a monitor. For detailed information
about compatible monitors, see
refer to its Operations & Maintenance Manual, or contact Verathon Customer Care.
Option 1. GlideScope Video Monitor
1. Ensure the video monitor is turned off prior to connecting or disconnecting the video cable or Smart
Cable.
2. Align the arrow on the video cable and the arrow on the video cable port, and then insert the cable into
the port. You will hear a click when the cable is successfully connected.
3. To disconnect the video cable from the monitor, rotate the connector ring in the direction of the release
arrow, and then remove the connector from the port.
Option 2. Core Video Monitor
1. Align the dot on the cable connector to the dot on one of the monitor's video connectors, and then fully
insert the cable. The connector attaches to the monitor with magnets.
2. To disconnect the video cable, hold the cable connector in one hand and support the monitor with the
other, and then pull. The cable disconnects from the monitor.
18
0900-4940 REV-13
Attach the Video Cable to the Monitor
Compatibility on page 13. For information on a specific monitor, please
Connector ring