TEFAL Cook4me touch Manual page 17

• error 15
decompression fault:
- unplug the Cook4me touch,
- leave to cool,
- remove the metal lid,
- correctly position
the ball cover.
• error 16
the Cook4me touch
doesn't build up pressure:
- add water to the bowl,
- resume cooking.
• error 17
the Cook4me touch
pressure fails to raise.
See page 26
"The Cook4me touch pressure fails
to raise and steam is not being
released properly".
30
• error 18
failure to detect the
locking rod.
• error 101, 106
display or recipe
loading error:
Unplug and restart the appliance.
If the problem persists, take
your appliance to an
Approved Service Centre.
For all problems,
unplug the Cook4me touch.
If the problem persists,
contact an Approved Service Centre.
If you experience
connection problems,
visit www.tefal.co.uk or
the Tefal app.
Your Cook4me touch model :
SERIE EPC13 & SERIE EPC13-A
Technical information
about your Cook4me touch:
Low pressure: 40kPa (109°c)
High pressure: 70kPa (115°c)
Very high pressure: 100kPa (119°C)
PS = 140kPa
Cook4me touch capacity: 6L
Usable capacity: 4L
Built-in heater:
enclosed heating resistor.
A beep signals that
operating pressure has been reached.
For models with WiFi:
Maximum transmitted power:
20dBm, 100mW
Frequency: 2,4GHz
Power consumption in standby
mode: 0.35W
Power consumption in networked
standby mode : 0.35W
What do Touch pictograms mean ?
• Product connected to the Wifi
• Product connected to the Wifi but
not connected to Tefal database
• Product not connected to the Wifi
31