Table of Contents
Advertisement
3. Disassembly and Reassemble
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
1. Disconnect the LED TV from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
-
Recommend Torque : 22.0 ~ 26.5lbf
CAUTION
• A strength of Torque can be changed depending on the situation.
3-1. TV Disassembly
Description & Screws
1
Carefully position the TV so that the screen is
facing downwards.
• Make sure to place the TV upon a soft
cushion or any material that will prevent
damage to the screen.
2
Remove the screws connecting the stand to the
TV. Then carefully remove the stand.
SCREW
6003-001907
SCREW-TAPTYPE : M4,L14,ZPC(BLK)
•
SET + STAND
3. Disassembly and Reassemble
Picture Description
3-1
Advertisement
Table of Contents
