Advertisement
Temperature Settings
Red = Comfort
Adjust Comfort
temperature by
pressing + or -
To switch between
"Comfort" and "Eco,"
press '
'
Green = Eco
Adjust Eco
temperature by
pressing + or -
Heating ON
Yellow LED will reamin lit when element is in heating state.
Override
Pressing '
' overrides the status from Comfort to Eco or vice versa.
The override is terminated automatically upon the next event in
the program, or at 00:00. (Correct time setting requires WiFi
connection).If the red/green light fl ashes, the heater is in override
mode.
Key Lock
To activate/deactivate key lock, press ' + ' and ' - ' simultaneously.
!
Opening up full programme schedules is only available via the
APP.
Quick Start Guide
Download Capa Connect Application
Setup Capa Connect & Voice assistant
Application Setup
To add a heater to your site, press the "+" button in the
top, right corner of the Control screen.
Enter the product identifi cation code (GDID)
and PIN code. Both codes are found on a
label at the back of the heater. The codes can
be entered manually, or by scanning the QR
code on the label.
Once paired the Bluetooth LED will remain lit.
Make sure Bluetooth is activated on your smartphone or tablet,
and follow the instructions in the app. For Android devices, device
location services must also be switched on.
Select your preferred WiFi network from the list and enter the
WiFi password when prompted.
Download the Capa Connect app to your
smartphone
or
tablet,
instructions on screen.
Use your smartphones camera to scan the QR code
and open web instructions. Click on Adding heater to
a Site for step by step instructions.
The heater needs to be paired with your
WiFi network. This is done by activating the
Bluetooth (BLE) discovery mode on the heater.
To activate Bluetooth search, press ' + ' and ' '
simultaneously for 3 seconds.
and
follow
the
Advertisement
