Maintenance - Husqvarna TC 112 Operator's Manual

• Move the product forward at low speed if the grass is
high and thick.
• Use full throttle when you cut the grass.
• Cut the grass in an irregular pattern.
• To get the best cutting result, cut the grass
frequently.
To empty the grass catcher
The product has an alarm that goes off if the grass
catcher is full. To stop the alarm, disengage the cutting
To engage and disengage the cutting
deck. Refer to
deck (TC 112) on page 18 or To engage and disengage
the cutting deck (TC 114) on page 19 .
1. Move the product to a location where you can empty
the grass catcher.
2. Make sure that the pedals are in the neutral position
and engage the parking brake.
3. Pull up the grass catcher handle to the highest
position.
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
1903 - 002 - 06.02.2023

Maintenance

Before you do any
4. Pull the grass catcher handle forward to tilt the grass
catcher and empty the grass.
5. Push the grass catcher handle rearward to lower the
grass catcher. Make sure that the grass catcher is
fully lowered and that the latches lock the lower part
of the grass catcher in position.
Maintenance schedule
X = The instructions are given in this operator's manual.
O = The instructions are not given in this operator's
manual. Let an approved service agent do the
maintenance.
21