Husqvarna TC 112 Operator's Manual page 16

4. Put the grass catcher handle down through the grass
catcher cover and the holes in the grass catcher
frame.
I
5. Install the screw (H) and the nut (I) in the tube of the
grass catcher handle.
6. Install the end plug (J) to the tube of the grass
catcher handle.
To install and remove the grass catcher
1. Tilt the grass catcher and put it on the 2 brackets.
2. Release the grass catcher and let it move into
position. Make sure that the latches in the bottom
lock the bottom part of the grass catcher in position.
3. To remove the grass catcher, move the grass
catcher handle until the latches release the bottom
of the grass catcher. Lift the grass catcher from the
brackets.
16
H
J
To connect the battery
WARNING:
Make sure that the ignition switch is in
the off position and that the ignition key is
removed.
The location of the battery is above the left rear wheel.
1. Remove the strap and the battery cover.
2. Make sure that the red cable is installed to the
positive (+) terminal on the battery.
3. Remove the screw and the nut on the negative (-)
terminal on the battery.
4. Attach the black cable to the negative (-) terminal on
the battery and install the nut and the screw.
5. Install the battery cover and attach the strap.
Risk of electric shock.
1903 - 002 - 06.02.2023