Yamaha SR400 2022 Owner's Manual page 33

With the engine turned off:
1. Place vehicle on centerstand.
2. Move the sidestand down.
3. Set engine stop switch to run position.
4. Turn main switch to on position.
5. Shift transmission into neutral.
6. Push the kickstarter lever down.
Does the engine start?
YES
With the engine still running:
7. Move the sidestand up.
8. Pull the clutch lever.
9. Shift transmission into gear.
10. Move the sidestand down.
Does the engine stall?
YES
After the engine has stalled:
11. Move the sidestand up.
12. Pull the clutch lever.
13. Push the kickstarter lever down.
Does the engine start?
YES
The system is OK. The motorcycle can be ridden.
Instrument and control functions
NO
NO
NO
4-15
WARNING
The vehicle must be placed on the
centerstand during this inspection.
If a malfunction is found, have the vehicle
inspected before riding.
The neutral switch may not be working.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The sidestand switch may not be working.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may not be working.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
4