Advertisement
Quick Links
Advertisement
Related Manuals for deerma DX118C
Summary of Contents for deerma DX118C
- Page 1 DX118C...
- Page 2 1. Handle 2. Power cord hook 3. Metal tube 4. Power cord 5. Power switch 6. Machine Body 7. Dust Panel frame switch 8. Trainer 9. Dust panel frame 10. Round brush 11. Ground brush...
- Page 3 1. Vacuum cleaner is an electric appliance, it must be used in accordance with the conditions of the specification, the specification must be properly preserved for future reference. 2 .Check and confirm that the vacuum cleaner uses voltage must be consistent with the power supply voltage. 3 .Do not inhale the following objects, or may damage the vacuum cleaner or cause a fire, resulting in personal injury and other accidents.
- Page 4 7 .Please do not use the vacuum cleaner in the following situations: A. fall and appear obviously damaged or running is not normal; B. power cord breakage. In above case, do not starting the machine, in a timely hand it over to our company designated maintenance Department to repair.
- Page 5 1. Press the dust panel frame switch to open the dust panel frame before use, confirm that the dust panel frame is equipped with the strainers, and the reassemble the dust panel frame. Check that the part of the body are firmly connected, and set the power switch to „0”...
- Page 6 3. The ground brush is facing the direction of the power switch of the machine body. Insert the ground brush into the suction inlet and confirm that the connection is secure. 4. Insert the power plug into the socket and confirm that the connection is secure.
- Page 7 1. Rotate the power cord hooks on the handle to release the power cord quickly. 2. After open the buckle from the fixing block on the metal tube, pull out the metal handle as a whole, and then clamp the buckle to the corresponding position of the main machine handle.
- Page 8 Note: Out off the power and unplug the power plug before troubleshooting. The vacuum cleaner has a reduced suction force and an abnormal sound. Troubleshooting: Stop working (overheated motor) Blocked ground brush or suction Troubleshooting: Dredge the attachments. Blocked strainer Troubleshooting: Clean or replace the strainer.
- Page 9 Vacuum cleaner motor does not work. Troubleshooting: Check whether the plug is securely plugged into the outlet or the power is on. The machine stopped working suddenly Troubleshooting: Turn off the power switch, unplug the power plug, and after the vacuum cleaner has been cooled for 30 minutes, clean the garbage in the dust panel frame and reuse the machine.
Need help?
Do you have a question about the DX118C and is the answer not in the manual?
Questions and answers