deerma DX700 Instruction Manual
Hide thumbs Also See for DX700:

Advertisement

Vacuum Cleaner
MODEL NO.: DX700

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DX700 and is the answer not in the manual?

Questions and answers

Summary of Contents for deerma DX700

  • Page 1 Vacuum Cleaner MODEL NO.: DX700...
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning on the use of the appliance by a person responsible for their safety.
  • Page 3: Main Parts

    ELECTRIC POWER If electric circuit is overloaded with other appliances, your vacuum cleaner may not operate properly. The vacuum cleaner should be operated on a separate electrical circuit from other operating appliances. SAFETY WARNING Although your vacuum cleaner is easy to operate, for your safety, the warnings below must be followed: 1.
  • Page 4 ASSEMBLY Press the release button on the bottom to Remove the dust collection container release the dust collection container. Replace filter back into the dust collection Make sure HEPA and filter cotton are container attach dust firmly positioned in place collectioncontainer to the machine.
  • Page 5 Keep the brush aligning the Attach connecting tube interface of the connecting tube, assembly to the main body. insert it slowly. Connect the pluginto power socket, and make sure the connection is secured. Slide the ON/OFF switch Slide “ON/OFF “switch forward to turn the to turn the vacuum off vacuum ON.
  • Page 6 Remove the HEPA filter and empty the dirt in the Wrap the power cord around the dust collection container cord bracket when not in use and into a trash receptacle. for storing. Remove the connecting tube, insert the floor brush into the machine and use as a hand held vacuum.
  • Page 7: Use Instructions

    USE INSTRUCTIONS 1. Make sure the vacuum cleaner is turned off and unplugged during assembly. Once the vacuum cleaner is assembled, make sure the HEPA filter is in place. 2. Plug the power cord into a power outlet. 3. Slide the ON switch, on the front of the main body near the top to turn the vacuum on 4.
  • Page 8 STORING Store the vacuum in a dry loca on. Do not place any heavy items on top of the vacuum during storage as this may result in possible damage to the vacuum. ENVIRONMENTAL PROTECTION If the appliance should no longer work at all, please make sure that it is disposed of in an environmentally friendly way.

Table of Contents