Installation Method - Royal Sovereign RPH-260G Owner's Manual

INSTALLATION METHOD

Installation with a stand unit
1. Check a hole at a bottom of a product and
put it in a hole on a Stand unit. (If these two
parts are not joined smoothly, please move
it from side to side.
2. Set up this heater under a desk or a table.
3. After installation, please check the LED lamp
whether the product is operating or not.
Installation under a desk or a table
※ No performance problem when installing under the desk, but slightly possible to transform it like a
bent according to installation circumstance.
rather than under a desk or a table.
1. Please check that a place has enough area to
stick this heater. Please check the back plate's
properties of a desk / table which can endure
the weight of this heater
2. Fix a bracket at the exact position with screw
bolts (Please check a direction of stand. If the
direction is wrong, It can be a reason of trouble)
3. Join the heater and the bracket with a furrow at
the back of heater.
4. After installation, please check the LED lamp
whether the product is operating or not.
Therefore, it is recommended
7
RPH-260G
to install it with a stand unit