Installation - Royal Sovereign RPH-260G Owner's Manual

SAFETY FEATURES
This unit has a built in safety features including overheat protection, current fuse and safety tip over
feature.
The temperature control button provides safety tip over feature in the event the unit falls over.
The temperature control button when tipped over will be pushed in as the unit falls, to automatically
turn the heater off.
Important Note: When using this heater under a desk or table, it is recommended that Low setting
be used due to the possibility of the heater having direct contact with the user (e.g. clothes).
Please refer to the installation section of the manual for details.

Installation

Power Cord Management
For added convenience, this unit comes with
a power cord winder.
1. Remove the screw (located at the back
of the unit at the top)
2. Use the supplied screw (M4x20) to connect
the power cord winder to the unit
Installation with feet
1. Locate the hole at the bottom of the heater.
2. Attach the two supplied stand brackets to
the heater
3. Place the heater under a desk or table or
other area where the heater is to be used.
4. Turn the unit ON and select the setting to
be used (Refer to Operation)
Tip for warming your lower body quickly in
cold weather: After adjusting to "Low" setting by pressing the temperature control button,
please sit down and put your feet up on it to enjoy the warmth. (Refer to photo 4)
5