Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Xiaomi MJSDT001QW
- Page 1 Multi-function Flashlight User Manual...
-
Page 2: Safety Instructions
Safety Instructions Please use the flashlight correctly as described in this manual. WARNINGS Do not let children use the seat belt cutter and window breaker. Do not leave the flashlight in a car or in direct sunlight for a long time in hot weather, as it may overheat and cause burns. - Page 3 The flashlight must be turned off before the battery is removed. Please recycle and dispose of the battery in a proper and environmentally friendly manner. Usage The flashlight emits a strong light. Avoid shining the light directly into the eyes of people or animals, or into the lenses of optical equipment.
- Page 4 Maintenance This flashlight cannot be disassembled, and should only be repaired by technicians authorized by Xiaomi. Do not attempt to repair it by yourself to avoid injury. Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only.
-
Page 5: Product Overview
Read this manual carefully before use, and retain it for future reference. Product Overview Thank you for using the Xiaomi Multi-function Flashlight. Battery Strike Bezel Level Tailcap Indicator Beam On/Off Seat Belt Adjuster Button Cutter Type-C Side Window Charging Port... -
Page 6: How To Use
How to Use Charging The flashlight must be fully charged before its first use. Slide the beam adjuster upwards to expose the Type-C charging port and insert the charging cable to charge. Note: The flashlight comes with a Type-C charging cable. When the flashlight is charging: Main light: Only low light can be enabled. - Page 7 Strobe mode/SOS mode: Press and hold the on/off button for 3 seconds at any time to turn on the strobe mode, then press again to cycle through: SOS mode - strobe mode. Press and hold the on/off button again for 0.5 seconds to turn the flashlight off.
- Page 8 Window breaker Unscrew the tailcap, place the end of the window breaker perpendicular to the window and press hard. The window breaker nail will pop out and break the glass. Once you let go, the window breaker nail will go back inside the flashlight.
-
Page 9: Troubleshooting
Troubleshooting Issues Possible Causes Solutions Low battery Charge the The battery power flashlight. level indicator remains red when you turn on the flashlight. The battery 1. The Type-C 1. Use the level indicator charging cable charging cable does not light isn't plugged in or provided, and up when... -
Page 10: Specifications
Specifications Model: MJSDT001QW Item Dimensions: 188 × 40.5 × 36 mm Net Weight: Approx. 240 g Input: 5 V 1.5 A IP Rating: IP54 Battery Type: Lithium-ion Battery Battery Rated Capacity: 3100 mAh Battery Rated Voltage: 3.6 V Charging Time: Approx. 180 min... -
Page 11: Regulatory Compliance Information
Regulatory Compliance Information Europe — EU declaration of conformity We, Shanghai HOTO Technology Co., Ltd., hereby, declare that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/- service/support/declaration.html UK declaration of conformity... - Page 12 Federal Communications Commission Supplier’s Declaration of Conformity This supplier’s declaration of conformity is hereby for Product: Xiaomi Multi-function Flashlight Model Number(s): MJSDT001QW Brand/Trade: Xiaomi We declare that the above mentioned device has been tested and found in compliance with CFR 47 Part 15 Regulation.
- Page 13 Country: China Telephone No.: 400-021-8696 Importer: Beryko s.r.o. Pod Vinicemi 931/2, 301 00 Plzeň www.beryko.cz Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Shanghai HOTO Technology Co., Ltd. (a Mi Ecosystem company) Address: Building 45, No.50 Moganshan Road, Shanghai, China For further information, please go to www.mi.com...