Xiaomi MJSDT001QW User Manual page 7

Strobe mode/SOS mode:
Press and hold the on/off button for 3
seconds at any time to turn on the strobe
mode, then press again to cycle through:
SOS mode - strobe mode. Press and hold the
on/off button again for 0.5 seconds to turn the
flashlight off.
Beam adjuster
Slide the beam adjuster up and down to adjust
between spotlight and floodlight.
Battery level indicator
If the battery level is above 20% while the
flashlight is turned on, the battery level
indicator will remain white. If the battery level
is 20% or below, the battery level indicator will
remain red until the battery runs out and the
flashlight turns off.
The battery level indicator keeps breathing
when charging and will turn off when charging
is completed. If charging the flashlight when
its battery is full, the battery level indicator will
turn off after breathing for 20 seconds.
Seat belt cutter
Unscrew the tailcap first and
then use the seat belt cutter
according to the following
steps.
Step 1: Pull the seat belt
across your chest tight with
your hand to keep it straight.
Step 2: Hold the flashlight and
slot the taut seat belt into the
cutter.
Step 3: Keep the flashlight
level and quickly pull it
horizontally to cut the seat
belt.
The cutter and the seat belt should be at a
!
45° angle to make cutting easier.
6