How To Use - Xiaomi MJSDT001QW User Manual

How to Use

Charging
The flashlight must be fully charged before its
first use.
Slide the beam adjuster upwards to expose
the Type-C charging port and insert the
charging cable to charge.
Note: The flashlight comes with a Type-C
charging cable.
When the flashlight is charging:
Main light: Only low light can be enabled.
Side light: You can cycle through low light,
blinking red light and blinking fog light.
Mode adjuster
Turn the mode adjuster to change between the
two different modes:
Main light mode
Side light mode
On/Off button
Using the button:
Press and hold the on/off button for 0.5
seconds to turn the flashlight on or off.
In main light mode:
Press and hold the on/off button for 0.5
seconds to turn on the low light, then press
again to cycle through: medium light - high
light - low light. Press and hold the on/off
button again for 0.5 seconds to turn the
flashlight off.
In side light mode:
Press and hold the on/off button for 0.5
seconds to enable the low light, then press
again to cycle through: high light - blinking red
light - blinking fog light - low light. Press and
hold the on/off button again for 0.5 seconds
to turn the flashlight off.
5