Removing Main Control Board; Remove Main Control Board - Star Micronics DP8340 Series Repair Manual

1-7 Removing Main Control Board

(1) Remove Main Control Board

1-1) Remove Cover unit outlined in section 1.1
1-2) Remove Upper case outline in section 1.2
1-3) Remove Ground wires black (3) from Mechanism outlined in section 1.4
1-4) Remove screws (4) from bottom plate of printer as shown below.
1-5) Separate Control Board and Chassis Unit from Lower Case
1-6) Remove from Chassis Unit
Chassis Unit
Star Micronics America, Inc.
Example 1.4
Example 1.6
8