Operation - Klarstein TOMAHAWK Manual

OPERATION

Information on How to Save Energy
• Reduce the opening time of the cover.
• Turn off the valve of the gas bottle as soon as the preparation process is finished.
• Preheat the appliance for 10 - 15 minutes only (except when using it for the first
time).
• Do not preheat the appliance for longer than recommended.
• Do not set the temperature of the appliance higher than required.
• Connect the hose and the gas pressure regulator of the gas bottle to the left side of
the appliance. Make sure the gas bottle is in a safe position and kept away from
heat.
• Make sure the gas bottle is in a safe position and away from heat sources.
• The diameter of the hose is 8 - 10 mm.
• The maximum length of the hose should be 1.5 metres.
Note: The grill cover must be open when the barbecue is ignited. Make sure that your
face is not directly above the burner when lighting the barbecue.
Lighting the Grill
The burner has the following ignition procedure:
Ignition with pilot gas control (main burner or main burner with side burner or main
burner with side burner and side burner).
• With all switches on the gas barbecue in the "Off" position, turn the gas cylinder
valve to the "On" position.
• To create a spark, you must press the gas control knob (A) and hold it in this
position for 3-5 seconds to allow the gas to flow and then turn it anticlockwise to
"HIGH" (B).
• This allows the spark to pass to the burner tube (C). You will hear a "snapping"
sound from the igniter and see an orange flame coming out of the burner tube on
the left side of the burner (D).
• After the "snapping sound", keep the gas control knob pressed for another two
seconds to allow the gas to flow completely through the burner tube (E) and ensure
ignition.
EN
29