Windshield - Komatsu PC600-6 Operation And Maintenance Manual

DETAILED CONTROLS AND GAUGES

WINDSHIELD

When opening or closing the ceiling window, front window, bottom
window, or door, always set the safety lock lever to the LOCK position.
If the control levers are not locked and they are touched by accident,
this may lead to a serious accident.
When opening the front window, hold the grip securely with both hands,
pull up, and do not let go until the automatic lock catch is locked.
There is danger that it will fall, so always lock it with left and right lock
pins (A).
When closing the front window, the window will move quicker under its
own weight. Hold the grip securely with both hands when closing it.
It is possible to store (pull up) the front window (top) in the roof
of the operator's compartment.
The front window cannot be opened on the rock crushing
specification machine.
Opening
1. Stop the machine on level ground, lower the work equipment completely to the ground, then stop the engine.
2. Set the safety lock lever securely to the LOCK position.
3. Check that the wiper blade is stowed in the right stay.
4. Pull lock pins (A) at the top left and right sides of the front
window to the inside to release the lock.
5. Hold the top grip with your right hand, pull it to the front to
remove the top of the front window from the frame, then set it
on the rail of the top roller.
3 - 28
WARNING
OPERATION