Table of Contents
Advertisement
11
Cleaning
Procedure
NOTICE!
Possible damages caused by unsuitable cleaning agents
Cleaners not approved by the manufacturer may permanently damage the unit.
Only use the cleaning agents listed on www.thomann.de and follow their instruc‐
tions for use.
Clean the appliance after every 30 operating hours, or if it was not in use for a longer period of
time.
1.
Make sure that the device is turned off, disconnected from the mains and completely
cooled down.
2.
Position the unit in a well ventilated place.
3.
Insert the suction hose of the device into the bottle containing the cleaning agent.
4.
Connect the device to the mains power grid and turn it on with the main switch.
5.
Wait until the unit has reached the required operating temperature.
6.
Switch the unit to continuous operation and let it produce fog / haze for about 20 sec‐
onds.
7.
Insert the suction hose of the device back into the fluid container and let the device
again produce fog / haze for about 20 seconds. This will rinse the lines.
ð The cleaning is completed.
Cleaning
HF-900 Haze Fogger
31
Hazer
Advertisement
Table of Contents
