Table of Contents
Advertisement
Troubleshooting
10
Troubleshooting
Symptom
The unit does not work
No haze output
No response to the DMX controller
The display shows 'Temperature is too HIGH'
HF-900 Haze Fogger
30
Hazer
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
Remedy
Check the mains connection and the main fuse.
1. Check the filling level of the fluid.
2. Switch the device off and check the hose that leads into the fluid container
for flow.
1. Check the address settings and the DMX polarity.
2. Try to use another DMX controller.
3. Check whether the DMX cables run near or parallel to high-voltage cables
that may cause damage or interference to a DMX interface circuit.
Please send the device to our Service Center for inspection.
If the procedures recommended above do not succeed, please contact our Service Center. You
can find the contact information at www.thomann.de.
Advertisement
Table of Contents
