Advertisement
Quick Links
THANK YOU FOR CHOOSING IDS TO PROTECT YOU
Thank you for purchasing an IDS Bi-directional Xwave
connects via the Xwave
wireless system.
2
Note: Xwave
devices are not compatible with Xwave devices!
For more information on IDS products please visit:
Note: Read the entire manual before attempting to install the Bi-Directional
Wireless DoorSense
Features
1.
Sends an open and close signal
2.
Frequency 869Mhz
3.
Supervised transmission power for better battery life
4.
External connector for 3rd party devices
5.
2 x AAA 1.5vDC batteries
Diagram
Figure 1: Wireless Door Contact
Antenna
2
Hub to the X-Series alarm panel or directly to the Onyyx
Battery
Holder
700-690-01B
2
Wireless DoorSense which
www.idsprotect.com
Tamper
Switch
External
Connection
Advertisement
Related Manuals for IDS DoorSense
Summary of Contents for IDS DoorSense
- Page 1 THANK YOU FOR CHOOSING IDS TO PROTECT YOU Thank you for purchasing an IDS Bi-directional Xwave Wireless DoorSense which connects via the Xwave Hub to the X-Series alarm panel or directly to the Onyyx wireless system. Note: Xwave devices are not compatible with Xwave devices! For more information on IDS products please visit: www.idsprotect.com...
- Page 2 Installing Door Contact 1. Mount the wireless door contact to the door frame via the mounting holes. (Making sure that the base does not extend passed the frame and will catch on the door when it opens or closes.) 2. Close the door and mount the magnet onto the door next to the reed switch.